# POTS Line Replacement

> Replace copper POTS lines with POTS IN A BOX®: managed 5G/LTE appliances that keep voice, fax, alarm and elevator lines working, with E911 and battery backup.

Last reviewed: 2026-11-09

## What is POTS line replacement?

POTS line replacement (also called POTS replacement) is the migration of legacy analog copper
phone lines to a managed cellular (5G/LTE) or wired IP connection using an on-site appliance,
so the analog devices on those lines keep working exactly as they did on copper. DataRemote's
POTS IN A BOX® appliances plug your devices directly into RJ-11 ports and preserve the analog
behaviors they depend on (in-band voice, ring-down circuits, FAX, DTMF signaling, alarm panel
communication, and E911 with geo-location) in supported configurations.

## Why it matters now

The copper network is being dismantled. The FCC has streamlined how carriers retire copper and
discontinue legacy services (see the FCC's copper retirement and technology transitions
dockets), and AT&T has stated its intent to exit copper across most of its wireline footprint
by 2029. The FCC counted 13.5 million traditional POTS lines still in service in December 2025,
declining at a 17.9% compound annual rate (FCC Voice Telephone Services Report). Carrier
retirement notices are accelerating (936 AT&T copper retirement notices in 2026, up from 240
in 2024), AT&T is authorized to discontinue copper voice service in portions of 19 states from
November 15, 2026, and documented rates on remaining lines now exceed $3,300 per month in some states
([DataRemote Copper Retirement Bulletin, Q4 2026](/resources/research/copper-retirement-bulletin)). Waiting is neither the safe nor the affordable
option, especially for fire alarm panels, elevator emergency phones, and other code-governed
endpoints whose copper path can be retired out from under them.

## How a migration works

1. **Audit your lines:** inventory every copper line and what runs on it: fax, fire and
   burglar alarm panels, elevator phones, ring-downs, POS terminals.
2. **Match the appliance:** choose the POTS IN A BOX® model and carrier plan certified for
   your device types, line counts, and coverage at each site.
3. **Plug in, no rewiring:** connect analog devices to the RJ-11 ports and keep your numbers.
   A typical install takes minutes per line.
4. **Manage through Ara:** monitor line status in real time, receive alerts, and troubleshoot
   every site remotely from a single dashboard.

## Which analog endpoints does it cover?

POTS IN A BOX® is designed to keep the analog equipment classes that still sit on copper in
service: life-safety and emergency lines (fire and burglar alarm panels, elevator emergency
phones, emergency call boxes, nurse call and panic buttons, medical alert systems, TTY machines);
voice, payment, and access lines (analog telephones, fax, point-of-sale terminals, ATMs,
intercoms, building-entry and gate-access systems); and machine lines (dial-up modems,
telemetry devices, utility meters, remote-monitoring equipment). Fire and burglar alarm
communication and elevator emergency communication each have a dedicated solution page; the
full endpoint list with what fails for each when its line is retired follows below.

## What POTS IN A BOX® provides

- Voice with auto-dial, voicemail, caller ID, hold, forwarding, transfer, and conference,
  plus E911 with GNSS location reporting on properly provisioned models and configurations.
- Analog data support for POS terminals, fax machines, alarm systems, elevators, and legacy
  modems, without rewiring.
- Automatic cellular failover and dual-SIM carrier redundancy.
- Integrated UPS battery backup of up to 48 hours, depending on model and load.
- Fleet management through the Ara platform: provisioning, real-time line status, alerts,
  remote diagnostics, and a carrier-level API.
- NDAA §889 and TAA compliant hardware with FCC, PTCRB, and UL listings, certified across
  major North American carriers. Certification and listing status is model-specific; each
  product page publishes the exact records for that model.

## What to verify before choosing

Confirm cellular coverage at each site, match line counts to FXS ports per appliance, and for
life-safety endpoints involve your alarm company, elevator contractor, and authority having
jurisdiction, since certification alone does not make an installation compliant. Final acceptance
depends on the product model, endpoint compatibility, installation, configuration, code
edition, and the AHJ.

## Related pages

- [Fire & burglar alarm communication](/solutions/fire-burglar-alarm-communication)
- [Elevator emergency communication](/solutions/elevator-emergency-communication)
- [Compare POTS IN A BOX® appliances](/pots-in-a-box)
- [What the term covers — and how it differs from VoIP (definition)](/newsroom/definitions/pots-line-replacement)
- [Migration planning and sequencing](/newsroom/topics/pots-line-replacement)

## Analog endpoints this solution supports

- **Analog telephones.** A conventional analog telephone expecting dial tone, loop current, and standard call progress from the line. No dial tone means no calls in or out from that handset.
- **ATMs.** A cash machine that authorises transactions and reports status over a dial-up or leased analog connection. Loss of connectivity takes the machine out of service and stops cash dispensing.
- **Building-entry systems.** An entry panel that places a call to a unit or a desk so a visitor can be admitted. Visitors cannot reach occupants, and access control falls back to physical keys.
- **Burglar alarm panels.** The control unit for intrusion detection that reports alarm and status events to a monitoring centre. Without a working path, intrusion events go unreported and monitoring lapses.
- **Dial-up modems.** A modem that places a data call over an analog line, still used by legacy control, metering, and building systems. Modem handshakes fail on paths that alter timing or apply voice compression, taking the connected system offline.
- **Elevator emergency phones.** The two-way emergency telephone inside a lift car, which must reach help without a passenger doing anything but press a button. A dead line means a trapped passenger cannot reach anyone, and the elevator can be red-tagged by an inspector.
- **Emergency call boxes.** A fixed emergency telephone that auto-dials a single predetermined destination when activated. The ring-down destination is never reached, so a call for help from a car park, campus, or platform goes nowhere.
- **Fax machines.** An analog fax device that negotiates and transmits documents in-band over a voice-grade line. Fax negotiation is sensitive to timing and compression, so a poorly chosen replacement path causes failed or partial transmissions.
- **Fire alarm panels.** The control unit that supervises fire detection devices and transmits alarm, supervisory, and trouble signals to a monitoring centre. Loss of the transmission path means alarms may not reach the central station, and the panel reports a trouble condition.
- **Gate-access systems.** A controller at a vehicle gate that dials a resident or an operator to authorise entry. Visitors and deliveries cannot be admitted, and residents lose remote entry control.
- **Intercoms.** Analog intercom equipment connecting fixed stations within or between buildings. Stations lose the ability to call each other or an attendant.
- **Medical alert systems (PERS).** A home or resident safety system whose wearable pendant or fall detector triggers a base unit to dial a 24/7 monitoring center over an analog line, send the subscriber account data, and open a two-way speakerphone call. The base unit dials a line that no longer exists, so a press of the pendant or a detected fall reaches no operator, and the resident may not know the call failed.
- **Nurse call and panic button systems.** A call system whose stations, pendants, pull cords, or panic buttons trigger a dialer that calls staff or a monitoring centre, usually with a voice message or an alarm code that identifies the location. The dialer seizes a line that no longer exists, so a call for help from a bedside, a bathroom, or a teller window reaches no one, and the system may not report that it failed.
- **Point-of-sale terminals.** A payment terminal that dials out to authorise card transactions over an analog line. A failed line means transactions cannot be authorised and the lane stops taking payment.
- **Remote-monitoring equipment.** Sensors and controllers reporting equipment or environmental status back to a monitoring system. Faults go undetected until someone notices them physically on site.
- **Telemetry devices.** Field equipment that reports measurements or accepts control commands over a data link. Readings stop arriving and remote control is lost, often without an obvious alarm.
- **TTY machines (text telephones).** A text telephone that lets people who are deaf, hard of hearing, or speech-impaired hold a typed conversation over a phone line, sending each character as audio tones to another TTY, a 711 relay service, or a 911 center. The TTY dials a line that no longer exists, or its tones are garbled by a compressed replacement path, so a typed call for help or service reaches no one or arrives as gibberish.
- **Utility meters.** A metering device that reports consumption over an analog or cellular link instead of a manual read. Automated reads stop, forcing estimated billing or physical site visits.

## Frequently asked questions

**What is a POTS line?**

A POTS (Plain Old Telephone Service) line is a traditional analog copper telephone circuit. For decades, fax machines, fire and burglar alarms, elevator phones, point-of-sale terminals and emergency call boxes have relied on POTS lines for dial tone and signaling.

**How does DataRemote replace a POTS line?**

DataRemote's POTS IN A BOX® appliances provide RJ-11 FXS ports that your existing analog devices plug into directly. The appliance carries voice, FAX, DTMF and alarm signaling over a managed cellular (5G/LTE) or wired IP connection, with full E-911, so devices behave exactly as they did on copper.

**What is the difference between POTS replacement and VoIP?**

VoIP replaces the telephone service itself with an IP application, while POTS replacement preserves your existing analog equipment. A POTS IN A BOX® appliance presents standard RJ-11/FXS ports with real dial tone, DTMF, and in-band signaling. Devices that can't run VoIP natively (alarm panels, elevator phones, fax machines, legacy modems) keep operating without being replaced, backed by battery and automatic cellular failover.

**How long does a POTS line replacement installation take?**

Most installations take minutes per line. The appliance arrives pre-provisioned: connect the antennas and power, plug your analog devices into the RJ-11 ports, and verify dial tone. No rewiring is required, and remote provisioning through the Ara platform means large multi-site rollouts don't require specialized on-site labor.

**How much can POTS replacement save?**

Copper POTS rates have risen sharply as carriers retire copper; documented rates now exceed $3,300 per line per month in some states. Customers typically see telecom savings of up to 50% by moving to a managed POTS IN A BOX® plan with predictable pricing.

**Is cellular reliable enough for life-safety lines?**

Yes. Each appliance includes integrated battery backup (up to 48 hours on the 90X1/90X2), automatic cellular failover, and carrier certifications. Line-status monitoring and alerts through the Ara platform provide continuous visibility into every line.

---

Canonical page: https://dataremote.com/solutions/pots-line-replacement
Organization: DataRemote, Inc. — POTS line replacement, cellular failover, and fixed wireless access solutions. https://dataremote.com
