# Copper Retirement > Copper retirement is the withdrawal of a carrier's copper network facilities from service, together with the analog telephone services delivered over them, under the FCC's notice and service-discontinuance framework. - Last reviewed: July 29, 2026 ## Why this matters Copper retirement converts an open-ended modernization decision into a deadline set by a carrier. Because it proceeds wire center by wire center, a multi-site organization faces many separate dates rather than one — and because the lines most often left on copper serve alarm panels, elevator phones, and other regulated equipment, missing a date can mean a non-functioning life-safety circuit rather than an inconvenience. ## Where things stand The FCC has shortened copper-retirement notice periods, and carriers have accelerated filings. AT&T has publicly stated it is working toward nationwide copper retirement, and has stopped accepting new copper orders in much of its footprint. Notice periods are now measured in months. ## Key facts - Retirement is planned and announced at wire-center granularity, so sites a few miles apart can be on different timelines. - Retiring physical copper and discontinuing the service that ran on it are separate regulatory steps that can proceed on different schedules. - The lines most often remaining on copper serve machines — alarm panels, elevator phones, fax machines, meters — not people. - Replacement is not guaranteed to be fiber; many sites losing copper are offered a wireless path instead. ## What is actually being withdrawn Two things, on two schedules. The physical copper plant is retired under the FCC's copper retirement rules, and the analog service delivered over it is discontinued under separate service-discontinuance rules. Tracking only one of them produces a migration plan built on the wrong date. ## Why the inventory is the hard part Copper lines were installed one at a time, over decades, usually by whoever needed one. The result is that most organizations cannot answer "how many analog lines do we have, and what is on each one?" from records alone. Carrier invoices describe billing accounts rather than physical circuits, and the equipment attached to a line almost never appears anywhere. Physical inspection consistently finds lines that billing missed and equipment nobody documented — a modem in a plant room, a roof-mounted telemetry unit, an intercom in a stairwell. ## Sequencing Regulated endpoints first, because they carry an approval step that ordinary lines do not. A voice line can be migrated and tested in an afternoon; an elevator emergency phone may need an inspector to accept the replacement path before the car returns to service. ## Frequently asked questions **When will copper be fully retired?** There is no single national date. Retirement proceeds wire center by wire center on carrier-specific schedules, so the operative date for any site is the one in the filing covering its serving wire center. **What should we do first?** Inventory. Identify every analog line, what equipment is on it, and which of those endpoints is governed by a code or a carrier requirement. Nearly every organization finds lines it did not know about, and that discovery drives the whole plan. **Which lines should be migrated first?** Life-safety circuits — fire alarm, elevator emergency, area-of-refuge — because they typically require an accepted replacement and sign-off from the authority having jurisdiction, which takes longer than replacing an ordinary voice line. ## Sources - [Copper Retirement](https://www.fcc.gov/general/copper-retirement) — Federal Communications Commission - [Technology Transitions](https://www.fcc.gov/general/technology-transitions) — Federal Communications Commission --- Canonical page: https://dataremote.com/newsroom/topics/copper-retirement Organization: DataRemote, Inc. — POTS line replacement, cellular failover, and fixed wireless access solutions. https://dataremote.com